Showing 25–36 of 420 results
Attached to a bolt and with 2-2’’ x 4’’ inserted vertically and horizontaly, this strongback waler is designed to keep formwork securely in place when stacking.
Provides support through horizontal joints between 1 1/8” wood forms when used with Flat Tie Wedges. Standard 8” and 10”
Used to secure Flat Tie to 1 1/8” wood forms. Remove when stripping and saved for reuse.
This tool is used to make a key way in the footing.
This tool helps strip off corners and forms more easily.
Form cleats are used to hold the top of 2 wood forms apart at the desired width. They are also used when you install windows in which you can’t pass a tie through.
The half-clip is used when forming against an existing wall or footing steps.
This 24’’ Aluminum or Steel scaffolding bracket fits on any panel. It offers 2 attaching systems. It can be attached to 2 bolts or 1 bolt with a nail fixed to the bottom.
This tool helps strip off corners and forms more easily.
This tool is used to produce a smooth finish on top of the formwork.
This tool is used for rebar twist ties
This lock fixes the swing corner at the desired angle. With this lock in place, you’ll never have to worry about your swing corners moving when you are pouring.
70 Comsewogue Rd SUITE 9 Setauket-East Setauket, NY 11733 Phone: (631) 928-4665
Navigation
Contact
Proud Members of these Fine Organizations:
