If you’re building slabs, setting block, or doing stucco and stone work, wire mesh is one of those “don’t skip it” materials. We stock wire mesh options for contractors working across Long Island and NYC, and we help homeowners too when you’re tackling a driveway patch, a small patio pour, or a masonry repair.
We see this a lot, the job goes smooth when the mesh is on site before the truck shows up. Our team can help you match the right mesh style to the pour, wall, or finish you’re doing.
We keep the common wire reinforcement and backing options moving through our yards, including:
Welded Wire Mats for slabs, flatwork, and reinforcement in concrete
Wire Lath for stucco, stone veneer, and scratch coat applications
Wire Mesh for general reinforcement and masonry uses
If you already have a spec, bring it in or call it out, sheet size, gauge, spacing, and whether you need flat sheets or rolls. If you’re not sure, tell us what you’re building and what thickness you’re pouring, we’ll point you in the right direction.
Contractors use wire mesh every day for sidewalks, patios, garage slabs, pole base pads, and light commercial flatwork. On the masonry side, wire lath is a go-to for stucco and cultured stone installs when you need a solid mechanical bond.
Real tip from our counter, don’t let the mesh end up sitting on the ground after the pour starts. Get it on chairs or dobies so it lands in the middle of the slab where it actually reinforces. And if you’re tying laps, plan your overlap and tie wire ahead of time so you’re not chasing it mid-pour.
Homeowners, if you’re doing a smaller pour, the same rules apply. Measure twice, and grab a little extra for cuts and waste, especially around edges and penetrations.
You can pick up wire mesh at our yards, and we can also work with you on staging and delivery for Long Island and NYC. Contractors like calling ahead with the cut list or takeoff, we pull it together, keep it organized, and we can load you fast when you roll in.
For deliveries, think about access and offload. If it’s a tight driveway or a busy street, let us know so we can plan the drop to keep your crew moving.
Call ahead with your slab size, wall area, or spec, and we’ll line up the right wire mesh for pickup or delivery. Stop by and talk to us, or ask us about delivery across Long Island and NYC.
Read More
Read Less
Showing all 3 results

6 x 6 spacing in the following steel & wire gauges: 10/10, 8/8, 6/6, and 4/4
4 x 4 spacing in the following steel and wire gauges: 6/6 and 4/4
6 x 6 spacing in the following steel & wire gauges: 10/10
4 x 4 spacing in the following steel & wire gauges: 4/4

Available in 2′ x 8′ Sheets
1.75″ & 2.5″ Galvanized

6 x 6 spacing in the following steel & wire gauges: 10/10
Address: 70 Comsewogue Rd SUITE 9 (end of the road)
Setauket-East Setauket, NY 11733
Phone: (631) 928-4665