Menu
Showing 49–60 of 420 results
To comply with height restrictions, the horizontal panel cage can be transported lying down
This universal 24’’ scaffolding bracket can fit on 5 different bolt spacings as shown in the second picture. It attaches on 2 bolts on panel bars.
Attached to a bolt and with a 2’’x4’’ inserted vertically, this strongback waler is designed to keep formwork securely in place when stacking.
Attached to a bolt and with a 2’’x4’’ inserted vertically, this strongback waler is designed to keep formwork securely in place when stacking.
These ties are used to hold insulating wall panels in place while a wall is being poured. The steel plates can be centered or placed off-centered on the tie
This lock fixes the swing corner at the desired angle. With this lock in place, you’ll never have to worry about your swing corners moving when you are pouring.
This lock fixes the swing corner at the desired angle. With this lock in place, you’ll never have to worry about your swing corners moving when you are pouring.
This tool is used to easily and quickly break off ties.
This 90-degree bracket is built to replace standard neutral corners. It can be used on any panel size.
The aligner is attached to a bolt and with the 4”x 4” lumber, it is design to correct the alignment of the formwork securing it vertically and horizontally.
Attached to a bolt and with a 2’’x4’’ inserted horizontally, this product is designed to keep formwork straight.
Hold two panels together when the bars don’t line up. Can be used on both sides of a panel.
70 Comsewogue Rd SUITE 9 Setauket-East Setauket, NY 11733 Phone: (631) 928-4665
Navigation
Contact
Proud Members of these Fine Organizations:
