Showing 1–12 of 325 results
2’ 8” : 2 bars – 7”, 27”
4’ : 2 bars – 7”, 27”
5’ : 3 bars – 7”, 27”, 51”
5’ 6” : 3 bars – 7”, 27”, 51”
6’ : 3 bars – 7”, 27”, 51”
2’ : 2 bars – 7”, 21”
2’ 8” : 2 bars – 7”, 21”
3’ : 2 bars – 7”, 21”
4’ : 3 bars – 7”, 21”, 37”
5’ : 4 bars – 7”, 21”, 37”, 55”
5’ 6” : 4 bars – 7”, 21”, 37”, 55”
6’ : 4 bars – 7”, 21”, 37”, 55”
“2’ 8” : 2 bars – 7”, 25”
3’ : 2 bars – 7”, 25”
4’ : 3 bars – 7”, 25”, 43”
5’ : 3 bars – 7”, 25”, 43”
5’ 6” : 4 bars – 7”, 25”, 43”, 63”
6’ : 4 bars – 7”, 25”, 43”, 63””
7.5”, 24.5”, 41.5”, 58.5”, 75.5”, 92.5, 109.5”
100 lb
The 7 bar panel is the most versatile panel on the market (for commercial work).
Width available
12’’ 3/8
14’’ 3/8
16’’ 3/8
18’’ 3/8
20’’ 3/8
22’’ 3/8
24’’ 3/8
Lengths available
10’’-11’’-12’’
12’’-13’’-14’’
14’’-15’’-16’’
16’’-17’’-18’’
18’’-19’’-20’’
20’’-21’’-22’’
22’’-23’’-24’’
On customer’s request, the panels or column fillers can be cut to the desired height. However, the distance between bars remains the same on the panel, as shown on the picture opposite
The main advantage of this system is that no accessories are required for assembly. The system is simple and is quick to assemble.
This galvanized angle bar column is highly resistant to pressure during the casting process. Indeed, the angle bar being 3” wide reduces the risk of bending. Since this system is in kit form, the plywood can be turned around when it becomes worn.
Also called “High and Low system”, this system works with 8’ 6 bars and 8’6” 6 bars family of panels.
To work with this system, a stacking plate is required to add panels vertically.
2’ 8” : 2 bars 7”, 23”
4’ : 3 bars – 7”, 23”, 39”
5’ 4” : 4 bars – 7”, 23”, 39”, 55”
6’ 8” : 5 bars – 7”, 23”, 39”, 55”, 71”
9’ 4” : 7 bars – 7”, 23”, 39”, 55”, 71”, 87”
70 Comsewogue Rd SUITE 9 Setauket-East Setauket, NY 11733 Phone: (631) 928-4665
Navigation
Contact
Proud Members of these Fine Organizations: