Showing 1–12 of 420 results
Designed for safely stacking lumber on top of panels to build a higher wall while preserving wall thickness.
Designed to hold a corner firmly in place, by hooking onto another tie,
This bracket is designed to attach 2 outside fillers at a 22° angle. It can be used with our swing corners.
Options : 15° and 30°
This bracket is designed to attach 2 outside fillers at a 22° angle. It can be used with our swing corners.
This bracket is designed to attach 2 outside fillers at a 45° angle
This bracket is designed to attach 2 outside fillers at a 45° angle. To be used with our inside 4”x 4” 45° corner or our swing corners.
This 90-degree bracket is built to replace standard neutral corners. It can be used on any panel size.
This 90-degree bracket is built to replace standard neutral corners. It can be used on any panel size.
A set of clips can replace many sizes of standard corners.
This bracket is designed to attach a line quickly and solidly to the top of a panel and align the wall without having to nail the top of the panel.
This universal 20’’ scaffolding bracket can fit on 4 different bolt spacings as shown in the second picture. It attaches on 2 bolts on panel bars.
This 20’’ scaffolding bracket model is available in Aluminum or in Steel. It fits on any panel. It offers 2 attaching systems. It can be attached to 2 bolts or, 1 bolt with a nail fixed to the bottom.
This 30’’ Aluminum or Steel scaffolding bracket fits on any panel. It offers 2 attaching systems. It can be attached to 2 bolts or 1 bolt with a nail fixed to the bottom.
Address: 70 Comsewogue Rd SUITE 9 (end of the road)
Setauket-East Setauket, NY 11733
Phone: (631) 928-4665
